Wednesday, 27 February 2019


AVALON Airshow 2019. Geelong. My Pod 15 is about Large Space Constructions. Welcome. 

Monday, 20 August 2018

A price of large space construction is lower than the existing technology of small space constructions. A composite material is cheap. No multiple launches. No risky docking in orbit.

Examples:
Our scientific orbital station could costs B$1-3
For comparison, the International Space Station costs B$150+ 

Our Moon base could costs   B$3-5

Our Mars base could costs   B$5-10

Example of renting: 
Our commercial space station or space factory of 7000 m3 for 20 years of life-time costs $1B. The station volume costs M$0.007/m3. 
A rent (M$1.36/m3) gives M$9,520 annually or M$190,400 for 20 years. Returns is 900% for 1 year or 190,000% for 20 years.

Our plans:

Our space hotel of 7000 m3 volume for 100 tourists. 
Our permanent large telescope with crew. Serviceable. Upgradeable. 
Our large permanent communication station with crew and large antenna (1 km diameter) could replace undersea cables due to high sensitivity of space receivers and low power of ground transmitters. No space waste, no failed satellites. 


The pressurised volume of large space station delivered to orbit with one space carrier is bigger than the International Space Station which was built during 10 years with multiple launches.



With SpaceX heavy carrier the space city can be built in Earth orbit after one launch:

The wall of the space construction can be thin if the strength of cured composite material is sufficient.



Our investigations showed, the strong composite can be cured directly in space environment, for example, in Earth orbit.

A new way to build a space construction

A short description of the project.

Tuesday, 3 July 2018

Our article on selection of the orbit motion for complete curing process in Low Earth Orbit: "Curing of large prepreg shell in solar synchronous Low Earth Orbit: Precession flight regimes" in Acta Astronautica, 151, 2018, 342–347. 

Saturday, 10 September 2016

Fresh our publication on polymerisation in stratosphere:
"First Stratospheric Flight of Preimpregnated Uncured Epoxy Matrix"
Alexey V. Kondyurin, Marcela M. M. Bilek, Irina V. Kondyurina, Roland Vogel, Kim K. de Groh
in JOURNAL OF SPACECRAFT AND ROCKETS

Abstract on the AIAA site

Saturday, 21 June 2014

Second curing in stratosphere experiment is successful.

The prepreg (uncured epoxy matrix E201 impregnated by carbon fibbers) has been cured in stratospheric flight at 28 km altitude. Project of University of Sydney, Perm State University and Netwind.ru under support of RFBR. Bending test results of flight and Earth samples are shown:
This is second successful flight experiment, where the prepreg with liquid epoxy matrix was sent to stratosphere and cured there completely. The results will be published soon. 

Tuesday, 10 June 2014

Gurit company news

Gurit (SWX Swiss Exchange: GUR), a leading global manufacturer and supplier of composite materials issued the release "Gurit’s SE 70 reaches new heights: The first prepreg to be cured in the stratosphere"



Thursday, 2 January 2014


40th COSPAR Scientific Assembly
Moscow, Russia, 2 - 10 August 2014
REQUEST FOR A CONTRIBUTED PAPER

Dear Colleague,

The purpose of this letter is to encourage you to submit for the 40th COSPAR Scientific Assembly a contributed paper to be included in event

G0.3. Influence of Free Space Environment on the Behaviour of Materials:

The free space environment is destructive for all materials used in space constructions: satellites, spacecraft, space stations and future space bases. The destructive factors of the space environment such as high vacuum, sharp temperature variations and temperature gradients, different kinds of high-energy cosmic irradiations and atomic oxygen flux in low Earth orbit are significantly different from experiences on the Earth. Spaceflight missions for investigation of materials exposed in the space environment are proceeding, as well as ground-base laboratory simulations. The understanding of physical-chemical processes occurring in materials in the space environment is key for our success in space exploitation in the future.
The program of this symposium will include presentations on the influence of the entire complex of physical factors associated with interactions of the space environment on spacecraft and space base materials, including detailed analysis of the physical and chemical processes occurring in materials outside the spaceship board. Both spaceflight and ground-based studies will be covered.
A complete description of the event and abstract submission instructions are available on the Assembly web page or in the Call for Papers which was distributed issue of Space Research Today, COSPAR’s information bulletin. The Assembly web page address is: http://www.cospar-assembly.org
Selected refereed papers from the event will be published in Advances in Space Research, Elsevier, and authors are encouraged to submit manuscripts after the Assembly for consideration.

It should be understood that this letter is not a commitment on the part of the organizers to provide financial support or complimentary registration.  Should financial support be needed, follow the instructions posted on the Assembly web page or see the Call for Papers.

Sunday, 9 December 2012

Launch of stratospheric balloon. Video from mini-camera installed on the cassette

The video was recorded only 21 minutes of the flight. At 5 km altitude the batteries become frozen. The highest altitude of the balloon was 27 km.

http://www.physics.usyd.edu.au/~alexey/REC_0001%20flight.AVI

It does not work in some viewers. Please, use VLC or similar. 

Wednesday, 28 November 2012

Snapshot: uncured prepreg in the stratospheric flight

The mini camera installed on the cassette recorded a video during the launch. The snapshot shows a part of the prepreg in the cassette over South Australia fields.

Monday, 26 November 2012

Experiment on polymerisation in stratosphere.

Last Sunday (25.11.2012) we have sent our cassette with uncured composite in stratosphere.
Konrad Schneider is holding the cassette. We tested the heater of the cassette in air and vacuum (20 Torrs) conditions.

The cassette contained uncured epoxy and polyether compositions with thermo and UV curable compounds.
The cassette was part of payload of stratospheric balloon in Horus project. 

Filling with helium.


Moving to field.


Balloon and payloads are ready. 


Three boxes of payload and the balloon in Adelaide sky.


Final altitude was about 27 km. 





Saturday, 28 July 2012

Project title “Polymerisation in the Stratosphere”

We are looking for partners to make a stratospheric flight experiment

The aim: The development of polymeric material that is curable in free space environment for use as structural components in large space constructions.

Background: Future space exploration will require large light-weight structures for habitats, greenhouses, space bases, space factories and so on. A new approach enabling large-size constructions in space relies on the use of the technology of the polymerization of fiber-filled composites with a curable polymer matrix applied in the free space environment. For example, a fabric impregnated with a long-life matrix (prepreg) can be prepared in terrestrial conditions and, after folding, can be shipped in a container to orbit and unfolded there by inflating. Then the matrix polymerization reaction is initiated producing a durable composite wall or frame. Using such an approach, there are no restrictions on the frame size and form of the construction in space and the number of deployment missions is kept at a minimum.
In free space the material is exposed to high vacuum, dramatic temperature changes, plasma of free space due to cosmic rays, sun irradiation and atomic oxygen (in low Earth orbit), micrometeorite fluence, electric charging and microgravitation. The development of appropriate polymer matrix composites requires an understanding of the chemical processes of polymer matrix curing under the specific free space conditions to be encountered.

Previous studies: Our preliminary studies of the polymerization process in high vacuum, space plasma and subject to temperature variations indicate that for specific prepeg preparations the polymerization process is likely to be successful in free space and that the composite cured in a free space environment will have satisfactory mechanical properties. However, the curing processes are sensitive to free space factors such as high vacuum, flux of high energy particles and temperature variations encountered.
Particularly pertinent observations from our previous work include:
·      The evaporation of the active components can stop the curing reaction and evaporation can cause bubble formation in the curing polymer matrix and compromise the mechanical properties of the cured matrix.
·      Fluxes of high energy particles in space irradiation can destroy macromolecules and create free radicals, which can accelerate the curing kinetics and strengthen the composite.
·      Temperature variations change dramatically the curing kinetics and evaporation process.

(For details see A. Kondyurin, Curing of composite materials for an inflatable construction on the Moon, chapter in “Moon. Prospective Energy and Material Resources”, Springer-Verlag, Berlin, 2012; A. Kondyurin, M. Bilek, Ion Beam Treatment of Polymers. Application aspects from medicine to space, Elsevier, Oxford, 2008; Kondyurin A., B. Lauke, R. Vogel, Photopolymerisation of composite material in simulated free space environment at low Earth orbital flight, European Polymer Journal 42 (2006) 2703–2714; Kondyurin A., B.Lauke, E.Richter: Polymerization Process of Epoxy Matrix Composites under Simulated Free Space Conditions, High Performance Polymers. 16, 2004, p. 163 – 175; Kondyurin A.V., Building the shells of large space stations by the polymerisation of epoxy composites in open space, Int. Polymer Sci. and Technol., v.25, N4, 1998, p. 78-80).

Our preliminary studies show, that the curing process can proceed and a durable composite material can be polymerized under simulated free space conditions. However in a laboratory environment it is not possible to simulate accurately the combinations of factors observed in space in order to assess how the various influences couple. To develop the appropriate polymer matrix composition for use in a particular free space environment, the effects of the prevailing free space conditions acting together must be taken into account. In 2010 we carried out the flight experiment with uncured composite in stratosphere during NASA balloon mission and showed, that the effect of cosmic rays on crosslinking of the uncured composite is significant and well observed. More detailed investigations of the curing process under real free space conditions, where all these free space factors act simultaneously during the curing process are required.

Scientific goal of the stratospheric flight experiment:
The goal of the experiment is an investigation of the effect of the stratospheric conditions on the polymerization process in the polymer matrix of the composite material. Stratospheric conditions are expected to have a unique impact on chemical processes in polymer materials. The unique combination of low atmospheric pressure, high energy cosmic rays, high intensity UV radiation including short wavelength UV, diurnal temperature variations and other aspects associated with solar irradiation has strong influence on chemical processes in polymeric materials. Since such conditions can not be adequately simulated in the laboratory, it is difficult to predict the impact on curing chemistry which is particularly important in designing polymers which could be shaped and cured in space for large scale structural applications.

Project plan:
The experiment involves expositing a cassette containing polymer samples to the local environment during the stratospheric balloon flights. The samples consist of uncured polymer matrix and carbon/glass fibers. The polymer matrix is activated by stratospheric conditions (temperature and sun irradiation) and the chemical polycondensation reaction is initiated. Control samples, which have been cured or partially reacted prior to the flight will be included in the cassette. After the flight, the samples will be returned to the laboratory and analysed by spectral, chemical and mechanical methods. The concentration of active components, the stage the reaction reached in each composite, structure of the polymer, degradation of polymer macromolecules, crosslinking, oxidation and mechanical properties will be analysed. To help understand how the conditions couple, a parallel set of samples will be exposed to similar vacuum levels, UV light and temperature variations in laboratory experiments. These samples will be analysed in the same way as those exposed in the space flights and the results compared.

The cassette holding samples to be exposed in space has a mass of about 1 kg and dimensions with the cover installed of about 200x100x100 mm3. The total mass of the samples is about 100 g. The samples will be placed into the cassette before the flight and sealed by a cover. The cassette is to be placed and fixed on the external side (outside) of the balloon’s cabin, preferably on the sun irradiated side. The control cassettes with the same samples will remain on Earth in the laboratory.

During launching the cover of the cassette will be opened and the samples will be exposed to the stratospheric environment during the flight. Expected conditions are the following: a pressure of about 1-2 Torr, a temperature on the sunny side in the range of +80…900C (during day light 12-14 hours) and -70…800C (night time), a solar flux of 1300 W/m2. The required flight time is 1 day or more.

The temperature, pressure and UV light intensity at the cassette will be recorded during the mission. For measurement, the cassette will be equipped with a thermistor, manometer, radiometer and a UV sensor. The data of temperature, pressure, radiation and UV light intensity will be recorded and sent to laboratory after landing.

After landing, the cassette with samples and the records of flight conditions are to be sent to the laboratory for analysis.

The chemically active polymer composition corresponds to safety rules for stratospheric flights: non-toxic, non-flammable and non-explosive.

Preferably, the experiment will be repeated during some flights because, the flight conditions may be different in individual flights. The deviation of flight conditions during different flights (temperature, irradiation exposure, pressure) will be used for analysis of kinetics of the chemical reactions. The cassette will be loaded with new samples for each flight.

Managing of the cassette operation and data recording during flight:

The cassette operation (opening and closing of the cover) can be done on command from Earth or automatically triggered by a pressure sensor to correlate with the altitude of the balloon flight.

The temperature, UV light intensity and pressure sensors can be installed in the cassette or data can be used from common sensors installed on the balloon. In the second case, the temperature, UV light intensity and pressure data must be recorded during the whole flight.

Wednesday, 11 July 2012

Publications about polymerisation in space environment


The idea of the direct curing in space environment came to me about 18 years ago. At that time, I was not sure, if it was done or it is impossible. All these years have been spent to get clear answer: yes, it is possible, but no, it is not done.

I met these two comments as reaction on my presentations and publications. People, who are far from space business, say, “it is done, and even ISS is done by this way!” People, who work in space industry, say, “this is impossible, but I do not know why?” All of these comments are not true.

During these years, I was carrying out a number of investigations, including experiments and theoretical calculations. Part of the results have been published and presented on conferences in different auditoriums and countries.

First time, a general way of direct curing was discussed in Russian journal “Plastic mass” (1997, No.8) and republished in English in “International Polymer Science and Technology”: Kondyurin A.V., Building the shells of large space stations by the polymerisation of epoxy composites in open space, Int. Polymer Sci. and Technol., v.25, N4, 1998, p. 78-80.

After that the further results have been published in a number of journals:

Kondyurin A., G.Mesyats, Yu.Klyachkin, Creation of High-Size Space Station by Polymerisation of Composite Materials in Free Space, J. of the Japan Soc. of Microgravity Appl., v.15, Suppl.II, 1998, p.61-65.
Kondyurin A., Kostarev K., Bagara M.V., Polymerization processes of epoxy plastic in free space conditions, Paper IAF-99-I.5.04, 50th International Astronautical Congress 4-8- Oct., 1999, Amsterdam, The Netherlands.
Briskman V., A.Kondyurin, K.Kostarev, V.Leontyev, M.Levkovich, A.Mashinsky, G.Nechitailo, T.Yudina, Polymerization in microgravity as a new process in space technology, Paper № IAA-97-IAA.12.1.07, 48th International Astronautical Congress, October 6-10, 1997, Turin Italy
Kondyurin A., High-size space laboratory for biological orbit experiments, Advanced space research, v.28, N4, 2001, pp.665-671
Kondyurin A., Kostarev K., Bagara M., Polymerization processes of epoxy plastic in simulated free space conditions, Acta Astronautica, vol.48, N2-3, 2001, pp.109-113
Briskman V.A., Yudina T.M., Kostarev K.G., Kondyurin A.V., Leontyev V.B., Levkovich M.G., Mashinsky A.L., Nechitailo G.S., Polymerization in microgravity as a new process in space technology, Acta Astronautica, vol.48, N2-3, 2001, pp.169-180.
Kondyurin A., Lauke B., Polymerisation processes in simulated free space conditions, Proceedings of the 9th International Symposium on Materials in a Space Environment, Noordwijk, The Netherlands, 16-20 June, 2003, ESA SP-540, September 2003, pp.75-80
Kondyurin A., B. Lauke, I. Kondyurina and E. Orba, Creation of biological module for self-regulating ecological system by the way of polymerization of composite materials in free space, Advances in Space Research, 2004, v. 34/7, p. 1585-1591.
Kondyurin A., B.Lauke, E.Richter: Polymerization Process of Epoxy Matrix Composites under Simulated Free Space Conditions, High Performance Polymers. 16, 2004, p. 163 – 175.
Kondyurin A., B.Lauke: Curing of liquid epoxy resin in plasma discharge, European Polymer Journal. 40/8, 2004, p. 1915 – 1923.
Kondyurin A., B. Lauke, R. Vogel, Photopolymerisation of composite material in simulated free space environment at low Earth orbital flight, European Polymer Journal 42 (2006) 2703–2714.
Kondyurina I., A. Kondyurin, B. Lauke, L. Figiel, R. Vogel, U. Reuter, Polymerisation of composite materials in space environment for development of a Moon base, Advances in space research, 37, 2006, p.109-115.
A. Kondyurin, B. Lauke, R. Vogel, G. Nechitailo, Kinetics of photocuring of matrix of composite material under simulated conditions of free space, Plasticheskie massi, 2007, v.11, pp.50-55.
A.V.Kondyurin, G.S.Nechitailo, Composite material for Inflatable Structures Photocured under Space Flight Conditions, Cosmonautics and rockets, 3 (56), 182-190, 2009.
A.V.Kondyurin, L.A.Komar, A.L.Svistkov, Modelling of curing of composite materials for the inflatable structure of a lunar space base, Journal on Composite Mechanics and Design, 15 (4), 512-526, 2009.
A.V.Kondyurin, L.A.Komar, A.L.Svistkov, Modelling of curing reaction kinetics in composite material based on epoxy matrix, Journal on Composite Mechanics and Design, vol. 16, no. 4, pp. 597-611, 2010.
A. Kondyurin, M. Bilek, Etching and structure transformations in uncured epoxy resin under rf-plasma and plasma immersion ion implantation, Nuclear Instruments and Methods in Physics Research, B 268, 1568–1580, 2010.
A. Kondyurin, Direct Curing of Polymer Construction Material in Simulated Earth’s Moon Surface Environment, Journal of spacecraft and rockets, V. 48, No. 2, pp.378-384, 2011.
A.V.Kondyurin, L.A.Komar, L.A. Svistkov, Modeling of the kinetics of the curing reaction of the epoxy binder-based composite material, Nanomechanics science and technology: An international journal, vol.2, issue 2, 167-183, 2011.
A. Kondyurin, L.A. Komar, A.L. Svistkov, Combinatory model of curing process in epoxy composite, Composites, part B, 43, 616–620, 2012.

In my two books:

A. Kondyurin, Curing of composite materials for an inflatable construction on the Moon, chapter in “Moon. Prospective Energy and Material Resources”, Springer-Verlag, Berlin, 2012, p. 503-518.

In Cornell University Arxiv.org site:

A. Kondyurin, I. Kondyurina, M. Bilek, Radiation damage of polyethylene exposed in the stratosphere at an altitude of 40 km, http://arxiv.org/pdf/1109.5457v1

The recent experiment has been done on the curing in stratosphere. First time, it was shown, that cosmic rays play role of additional hardener for the polymer. Space makes polymer harder. This real flight experiment supported previous laboratory investigations and made me sure, that it will work in real space flight.

If you are interested in and do not have subscription for these journals, please, ask me, I will send you a copy. 

Thursday, 17 May 2012

Curing at space temperatures


Well, go to next problem. Temperature.
The temperature in space is tricky. Usual imagination, what we have on Earth, does not work there. Imagine: there are no walls, furniture, ground, neighbours, friends and wind (air) surrounded your body. Temperature depends on the irradiation from the Sun and on internal sources. All bodies irradiate following Stefan–Boltzmann law. 
If no irradiations from neighbours, your temperature goes to absolute zero, well, not zero, because of space irradiations. But anyway, it comes to very low temperature; the space flight measurements give temperatures about -150 C. If you are irradiated by the Sun, your sun-side will be heated up in dependence on reflectivity of your surface, thermocapacity, thermoconductivity and geometry of your body. Very quickly you start to feel, that one side of you is burning (can be +150 C and more), while the other side is still frozen. You will want to turn. If you turn quickly enough, your temperature will be more or less steady. So, the rotation of the body is very important.
Now let’s remember, how the chemical reaction depends on temperature. At first approximation, the rate of reaction follows Arrhenius law: the rate increases with temperature. Usually, the curing system is selected to be non-reacting at storage temperatures so, that uncured material can be kept in container at transportation without the reaction. Therefore, the temperature at curing should be higher than on Earth and at transportation.
There are some ways to get it. First of all, rotation of the construction side by side to the Sun should be so, that each part of the construction will be heated enough to be cured completely. It does not need massive efforts, because no friction there, and if the construction is accelerated it will rotate forever. You have to be smart enough to calculate the rotation speed and direction. It can be calculated, measured, compared with experiments on orbit. The regime of rotation can be optimised to get complete curing in all sides and parts of the construction.
But what can you do on the Moon or on an asteroid? You cannot rotate the Moon of asteroid as we want. If you are settled down on equator of the Moon, you can expect heating enough with the turning of the Moon. But if your construction has to be placed on polar, what is more likely because of found water there, there is no way to get a heat enough. You have to heat it with internal sources, for example, with internal electrical heaters. And you have to be ready to spend a lot of energy during curing reaction. It is not a huge amount of energy: ISS astronauts spend a comparable amount of energy to support life there. The construction can be heated partially: sector by sector, that can decrease an amount of power, you have to apply.
Another way is to use photocuring reaction. There are compositions that can be cured under UV light. That’s nice way if you need to cure quickly, on command after storing long time in the container. In such case, the curing reaction is not so sensitive to the storage temperature, while the rate of curing anyway depends on temperature. Such photocuring systems can be suitable for repairmen set. But the photocured materials have usually lower mechanical strength, lower radiation stability, shorter life-time and narrower diapason of exploitation conditions, than thermocured materials. These two kinds of materials (photocured and thermocured) are specialised for different constructions. You can choose one of them for particular construction and exploitation conditions.
However, there is a serious problem with the temperature in space: thermostresses. This problem needs attention. Usually, on Earth the prepreg (uncured material) is placed into curing oven, heated slowly with optimised rate of the temperature increase, cured at uniformly distributed temperature, and cooled slowly. The heating/cooling process is optimised to avoid the thermostresses in the construction. In space, when the construction is irradiated from one side, the Sun irradiation creates a temperature gradient. The curing reaction follows to the temperature gradient in the construction. Therefore, the different parts of the construction will be cured at different temperature and will keep memory of the temperature gradient. When the cured construction changes an orientation, the temperature gradient changes and it generates the stresses. As higher temperature gradient is at curing, as higher stresses appear. The stresses deform your construction and decrease the mechanical strength of the construction.
Because no one large curing oven with temperature stabilisation is installed in Earth orbit, where you can put your construction for precise curing, the temperature regime of the construction should be precisely calculated and the flight regime should be optimised to get completely cured material of the construction without significant stresses.

Monday, 14 May 2012

Curing in free space plasma


Free space plasma, deadly space irradiations, burning Sun light. Who can live there? What material can survive there? For how long? – Hopeless questions. That’s enemy environment for all Earth-born stuffs.
All materials, including polymers, degrade in space environment under high energy cosmic rays, Sun wind, atomic oxygen of residual Earth atmosphere (if Low Earth Orbit). Since first space flights, engineers worry about degradation of the materials used for space ships, satellites, stations. A number of experiments have been done, when different kinds of materials were exposed on Low Earth Orbits. Then the materials were delivered on Earth, to laboratories for an investigation. The structure changes in all polymer materials have been observed, described, calculated and simulated in laboratory experiments.
First of all, this is an effect of etching. The materials disappear with time: layer-by-layer. You can find a rate of etching in literature for different kinds of materials. There are handbooks, database, standards and recommendations how to choose a right material based on mission, orientation, lifetime and functionality of materials in particular space construction.
At second, the materials become brittle, cracked, and finally broken under space conditions. The molecular structure changes significantly: polymers become crosslinked, depolymerised and oxidised in dependence of kind of polymer. All these effects in polymers can be observed in laboratory under plasma and high energy particles. The chemistry of these processes is based on generation of free radicals, when a high energy particle hits a macromolecule and forms free radicals. The free radicals are very active and start to react with neighbour macromolecules. These chemical reactions transform the initial macromolecules dramatically.
The same radiation effects are observed in macromolecules when uncured polymer with liquid matrix is exposed in UV light, g-irradiation, X-ray beam, plasma and ion beam. 
At first, the etching rate is higher. The uncured polymer degrades quicker than the hard polymer. We measured it. But the difference is only 2 times. Is it significant? Yes, for first two-three hours. But then the polymer becomes hard and stays 15-20 years. Therefore, the contribution of high etching rate, when the polymer was liquid, is neglectable in comparison of low etching rate at the rest of life. 
At second, the radiation damaging of the macromolecules is the same. The generated free radicals in matrix can cause two kinds of reactions: crosslinking and depolymerisation. If right composition is selected, the crosslinking reactions proceed and the polymer matrix becomes hard. The same effect as in curing reaction, but without any hardener! Therefore, the free space environment can play a role of additional initiator of the crosslinking reaction. 
"The space makes polymer hard", as the journalist wrote about our investigations. That’s true, in the case of uncured composite the enemy space environment helps us to get durable material. Let’s use this help smartly.